8 Year Exporter Pipe Line Construction - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We keep on with our enterprise spirit of Quality, Efficiency, Innovation and Integrity. We intention to create extra worth for our buyers with our prosperous resources, superior machinery, experienced workers and superb services for China Spiral Submerged Arc Pipe , Lsaw Steel Pipe , Pipe Welding Requirements , We aim at Ongoing system innovation, management innovation, elite innovation and market innovation, give full play to the overall advantages, and constantly improve service quality.
8 Year Exporter Pipe Line Construction - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral Detail:

Mechanical Property

steel grade

minimum yield strength
Mpa

Tensile strength

Minimum elongation
%

Minimum impact energy
J

Specified thickness
mm

Specified thickness
mm

Specified thickness
mm

at test temperature of

<16

>16≤40

<3

≥3≤40

≤40

-20℃

0℃

20℃

S235JRH

235

225

360-510

360-510

24

-

-

27

S275J0H

275

265

430-580

410-560

20

-

27

-

S275J2H

27

-

-

S355J0H

365

345

510-680

470-630

20

-

27

-

S355J2H

27

-

-

S355K2H

40

-

-

Chemical Composition

Steel grade

Type of de-oxidation a

% by mass, maximum

Steel name

Steel number

C

C

Si

Mn

P

S

Nb

S235JRH

1.0039

FF

0,17

1,40

0,040

0,040

0.009

S275J0H

1.0149

FF

0,20

1,50

0,035

0,035

0,009

S275J2H

1.0138

FF

0,20

1,50

0,030

0,030

S355J0H

1.0547

FF

0,22

0,55

1,60

0,035

0,035

0,009

S355J2H

1.0576

FF

0,22

0,55

1,60

0,030

0,030

S355K2H

1.0512

FF

0,22

0,55

1,60

0,030

0,030

a. The deoxidation method is designated as follows:

FF: Fully killed steel containing nitrogen binding elements in amounts sufficient to bind available nitrogen (e.g. min. 0,020 % total Al or 0,015 % soluble Al).

b. The maximum value for nitrogen does not apply if the chemical composition shows a minimum total Al content of 0,020 % with a minimum Al/N ratio of 2:1, or if sufficient other N-binding elements are present. The N-binding elements shall be recorded in the Inspection Document.

Hydrostatic Test

Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D

Permissible Variations In Weights and Dimensions

Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter
Wall thickness at any point shall not more than 12.5% under the specified wall thickness


Product detail pictures:

8 Year Exporter Pipe Line Construction - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral detail pictures

8 Year Exporter Pipe Line Construction - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral detail pictures

8 Year Exporter Pipe Line Construction - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral detail pictures

8 Year Exporter Pipe Line Construction - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral detail pictures


Related Product Guide:

We take customer-friendly, quality-oriented, integrative, innovative as objectives. Truth and honesty is our management ideal for 8 Year Exporter Pipe Line Construction - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral , The product will supply to all over the world, such as: Thailand, Argentina, New Zealand, For many years, we now have adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.
  • The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Mona from Cape Town - 2017.09.29 11:19
    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Astrid from Grenada - 2018.06.09 12:42
    Write your message here and send it to us