Factory Cheap Hot Welding Thin Wall Tubing - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

We intention to see quality disfigurement within the creation and supply the ideal support to domestic and overseas buyers wholeheartedly for Drainage Pipe Line , Spiral Submerged Arc Pipe , Sewer Pipe Line , We are able to do your tailored get to fulfill your own satisfactory! Our organization sets up several departments, including manufacturing department, sales department, high quality control department and sevice center, etc.

Factory Cheap Hot Welding Thin Wall Tubing - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:

Chemical Composition of ASTM A234 WPB & WPC

Element	Content, %
Element	ASTM A234 WPB	ASTM A234 WPC
Carbon [C]	≤0.30	≤0.35
Manganese [Mn]	0.29-1.06	0.29-1.06
Phosphorus [P]	≤0.050	≤0.050
Sulfur [S]	≤0.058	≤0.058
Silicon [Si]	≥0.10	≥0.10
Chromium [Cr]	≤0.40	≤0.40
Molybdenum [Mo]	≤0.15	≤0.15
Nickel [Ni]	≤0.40	≤0.40
Copper [Cu]	≤0.40	≤0.40
Vanadium [V]	≤0.08	≤0.08

*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.

Mechanical Properties of ASTM A234 WPB & WPC

ASTM A234 Grades	Tensile Strength, min.		Yield Strength, min.		Elongation %, min
ASTM A234 Grades	ksi	MPa	ksi	MPa	Longitudinal	Transverse
WPB	60	415	35	240	22	14
WPC	70	485	40	275	22	14

*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.

Manufacture

The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.

Product detail pictures:

Related Product Guide:

All we do is usually connected with our tenet Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Factory Cheap Hot Welding Thin Wall Tubing - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Turkmenistan, belarus, Portugal, Now, with the development of internet, and the trend of internationalization, we've got decided to extend business to overseas market. With the propose of bringing more profits to oversea customers by providing directly abroad. So we have changed our mind, from home to abroad, hope to give our customers more profit, and looking forward to more chance to make business.

Gas Welding Exhaust Pipe