Factory Outlets Residential Gas Piping - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for Metal Pipe Welding , Seam Tubes, Sewer Line Cleanout , We are confident that there will be a promising future and we hope we can have long term cooperation with customers from all over the world.
Factory Outlets Residential Gas Piping - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:

The Mechanical Properties of the SSAW pipe

steel grade

minimum yield strength
Mpa

minimum Tensile strength
Mpa

Minimum Elongation
%

B

245

415

23

X42

290

415

23

X46

320

435

22

X52

360

460

21

X56

390

490

19

X60

415

520

18

X65

450

535

18

X70

485

570

17

The Chemical composition of the SSAW pipes

steel grade

C

Mn

P

S

V+Nb+Ti

Max %

Max %

Max %

Max %

Max %

B

0.26

1.2

0.03

0.03

0.15

X42

0.26

1.3

0.03

0.03

0.15

X46

0.26

1.4

0.03

0.03

0.15

X52

0.26

1.4

0.03

0.03

0.15

X56

0.26

1.4

0.03

0.03

0.15

X60

0.26

1.4

0.03

0.03

0.15

X65

0.26

1.45

0.03

0.03

0.15

X70

0.26

1.65

0.03

0.03

0.15

The Geometric tolerance of the SSAW pipes

Geometric tolerances

outside diameter

Wall thickness

straightness

out-of-roundness

mass

Maximum weld bead height

D

T

≤1422mm

>1422mm

<15mm

≥15mm

pipe end 1.5m

full length

pipe body

pipe end

T≤13mm

T>13mm

±0.5%
≤4mm

as agreed

±10%

±1.5mm

3.2mm

0.2% L

0.020D

0.015D

‘+10%
-3.5%

3.5mm

4.8mm

Hydrostatic Test

product-description1

The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.

Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.


Product detail pictures:

Factory Outlets Residential Gas Piping - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral detail pictures


Related Product Guide:

We take customer-friendly, quality-oriented, integrative, innovative as objectives. Truth and honesty is our administration ideal for Factory Outlets Residential Gas Piping - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: Nepal, Lesotho, Serbia, Due to good quality and reasonable prices, our items have been exported to more than 10 countries and regions. We are looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.
  • The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Arlene from Dominica - 2017.04.28 15:45
    Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
    5 Stars By Maggie from Melbourne - 2018.07.27 12:26
    Write your message here and send it to us