Factory Wholesale Gas Pipe Line Fitting - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our great management, potent technical capability and strict excellent handle procedure, we continue on to provide our customers with reputable top quality, reasonable selling prices and great providers. We purpose at becoming amongst your most trusted partners and earning your satisfaction for Painting Steel Pipe , Welding Thin Wall Tubing , Spiral Welded Pipe Vs Longitudinal , First business, we learn each other. Further business, the trust is getting there. Our company always at your service at any time.
Factory Wholesale Gas Pipe Line Fitting - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral Detail:

Physical properties of epoxy powder materials

Specific gravity at 23℃: minimum 1.2 and maximum 1.8
Sieve analysis: maximum 2.0
Gel time at 200 ℃: less than 120s

Abrasive blast cleaning

Bare steel surfaces shall be abrasive blast-cleaned in accordance with SSPC-SP10/NACE No. 2 unless otherwise specified by the purchaser. The blast anchor pattern or profile depth shall be 1.5 mil to 4.0 mil(38 µm to 102 µm) measured in accordance with ASTM D4417.

Preheating

Pipe that has been cleaned shall be preheated at temperature less than 260℃, the heat source shall not contaminate the pipe surface.

Thickness

The coating powder shall be applied to the preheated pipe at a uniform cure-film thickness of not less than 12 mils(305μm) on the exterior or interior. The maximum thickness shall not exceed a nominal 16 mils(406μm) unless recommended by the manufacturer or specified by the pruchaser.

Optional epoxy performance testing

The purchaser may specify additional testing to establish epoxy performance. The following test procedures, all of which shall be performed on production pipe test rings, may be specified:
1. Cross-section porosity.
2. Interface porosity.
3. Thermal analysis (DSC).
4. Permanent strain (bendability).
5. Water soak.
6. Impact.
7. Cathodic disbondment test.


Product detail pictures:

Factory Wholesale Gas Pipe Line Fitting - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures

Factory Wholesale Gas Pipe Line Fitting - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures

Factory Wholesale Gas Pipe Line Fitting - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures


Related Product Guide:

No matter new shopper or old customer, We believe in very long expression and dependable relationship for Factory Wholesale Gas Pipe Line Fitting - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral , The product will supply to all over the world, such as: Madrid, Rotterdam, Israel, With a team of experienced and knowledgeable personnel, our market covers South America, the USA, the Mid East, and North Africa. Many customers have become our friends after good cooperation with us. If you have the requirement for any of our goods, make sure you contact us now. We're looking forward to hearing from you soon.
  • The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
    5 Stars By Johnny from Suriname - 2018.06.30 17:29
    We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
    5 Stars By Ryan from UAE - 2017.02.18 15:54
    Write your message here and send it to us