Factory Wholesale Saw Welded Pipe - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral
Factory Wholesale Saw Welded Pipe - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:
Chemical Composition of ASTM A234 WPB & WPC
Element |
Content, % |
|
ASTM A234 WPB |
ASTM A234 WPC |
|
Carbon [C] |
≤0.30 |
≤0.35 |
Manganese [Mn] |
0.29-1.06 |
0.29-1.06 |
Phosphorus [P] |
≤0.050 |
≤0.050 |
Sulfur [S] |
≤0.058 |
≤0.058 |
Silicon [Si] |
≥0.10 |
≥0.10 |
Chromium [Cr] |
≤0.40 |
≤0.40 |
Molybdenum [Mo] |
≤0.15 |
≤0.15 |
Nickel [Ni] |
≤0.40 |
≤0.40 |
Copper [Cu] |
≤0.40 |
≤0.40 |
Vanadium [V] |
≤0.08 |
≤0.08 |
*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.
Mechanical Properties of ASTM A234 WPB & WPC
ASTM A234 Grades |
Tensile Strength, min. |
Yield Strength, min. |
Elongation %, min |
|||
ksi |
MPa |
ksi |
MPa |
Longitudinal |
Transverse |
|
WPB |
60 |
415 |
35 |
240 |
22 |
14 |
WPC |
70 |
485 |
40 |
275 |
22 |
14 |
*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.
Manufacture
The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.
Product detail pictures:
Related Product Guide:
continue on to further improve, to make sure product top quality in line with market and consumer standard requirements. Our firm has a excellent assurance program have already been established for Factory Wholesale Saw Welded Pipe - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Mali, Thailand, Belize, Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Quyen Staten from Uzbekistan - 2017.06.19 13:51
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Beulah from Afghanistan - 2018.09.21 11:44