Featured
-
China Wholesale X52 SSAW Line Pipe - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral
Mechanical Property steel grade minimum yield strength Mpa Tensile strength Minimum elongation % Minimum impact energy J Specified thickness mm Specified thickness mm Specified thickness mm at test temperature of ＜16 ＞16≤40 ＜3 ≥3≤40 ≤40 -20℃ 0℃ 20℃ S235JRH 235 225 360-510 360-510 24 - - 27 S275J0H 275 265 430-580 410-560 20 - 27 - S275J2H 27 - - S355J0H 365 345 510-680 470-630 20 - 27 - ... -
OEM Factory For Water Line Tubing - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral
Physical properties of epoxy powder materials Specific gravity at 23℃: minimum 1.2 and maximum 1.8 Sieve analysis: maximum 2.0 Gel time at 200 ℃: less than 120s Abrasive blast cleaning Bare steel surfaces shall be abrasive blast-cleaned in accordance with SSPC-SP10/NACE No. 2 unless otherwise specified by the purchaser. The blast anchor pattern or profile depth shall be 1.5 mil to 4.0 mil(38 µm to 102 µm) measured in accordance with ASTM D4417. Preheating Pipe that has been cleaned shall be p... -
OEM Factory For Gas Line For Stove - Spirally welded steel pipes ASTM A252 grade 1 2 3 – Spiral
Mechanical Property Grade 1 Grade 2 Grade 3 Yield Point or yield strength, min, Mpa(PSI) 205(30 000) 240(35 000) 310(45 000) Tensile strength, min, Mpa(PSI) 345(50 000) 415(60 000) 455(66 0000) Product analysis The steel shall contain no more than 0.050% phosphorous. Permissible Variations In Weights and Dimensions Each length of pipe pile shall be weighed separately and its weight shall not vary more than 15% over or 5% under its theoretical weight, calculated using its length and... -
China Wholesale Oil And Gas Pipe - Outside 3LPE coating DIN 30670 inside FBE coating – Spiral
Product Description Cangzhou Spiral Steel Pipes Group Co., Ltd have 4 production lines of anticorrosion & thermal insulation to perform the 3LPE coating and FBE coating. The maximum outside diameter can be 2600mm. The coatings are suitable for the protection of buried or submerged steel pipes at design temperatures of -40℃ to +80℃. The present standard specifies requirements for coatings that are applied to spirally welded steel pipes and fittings used for the construction of pipelines fo... -
Good Quality Pipe Stands For Welding - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral
Physical properties of epoxy powder materials Specific gravity at 23℃: minimum 1.2 and maximum 1.8 Sieve analysis: maximum 2.0 Gel time at 200 ℃: less than 120s Abrasive blast cleaning Bare steel surfaces shall be abrasive blast-cleaned in accordance with SSPC-SP10/NACE No. 2 unless otherwise specified by the purchaser. The blast anchor pattern or profile depth shall be 1.5 mil to 4.0 mil(38 µm to 102 µm) measured in accordance with ASTM D4417. Preheating Pipe that has been cleaned shall be p... -
Good Quality Welded Pipe Fittings - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral
Chemical Composition of ASTM A234 WPB & WPC Element Content, % ASTM A234 WPB ASTM A234 WPC Carbon [C] ≤0.30 ≤0.35 Manganese [Mn] 0.29-1.06 0.29-1.06 Phosphorus [P] ≤0.050 ≤0.050 Sulfur [S] ≤0.058 ≤0.058 Silicon [Si] ≥0.10 ≥0.10 Chromium [Cr] ≤0.40 ≤0.40 Molybdenum [Mo] ≤0.15 ≤0.15 Nickel [Ni] ≤0.40 ≤0.40 Copper [Cu] ≤0.40 ≤0.40 Vanadium [V] ≤0.08 ≤0.08 *The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo... -
High Definition Gas Metal Pipe - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral
Physical properties of epoxy powder materials Specific gravity at 23℃: minimum 1.2 and maximum 1.8 Sieve analysis: maximum 2.0 Gel time at 200 ℃: less than 120s Abrasive blast cleaning Bare steel surfaces shall be abrasive blast-cleaned in accordance with SSPC-SP10/NACE No. 2 unless otherwise specified by the purchaser. The blast anchor pattern or profile depth shall be 1.5 mil to 4.0 mil(38 µm to 102 µm) measured in accordance with ASTM D4417. Preheating Pipe that has been cleaned shall be p... -
Good Quality A252 GRADE 3 Steel Pipe - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral
Mechanical Property steel grade minimum yield strength Mpa Tensile strength Minimum elongation % Minimum impact energy J Specified thickness mm Specified thickness mm Specified thickness mm at test temperature of ＜16 ＞16≤40 ＜3 ≥3≤40 ≤40 -20℃ 0℃ 20℃ S235JRH 235 225 360-510 360-510 24 - - 27 S275J0H 275 265 430-580 410-560 20 - 27 - S275J2H 27 - - S355J0H 365 345 510-680 470-630 20 - 27 - ... -
OEM/ODM Factory The Pipe Line - Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H – Spiral
Mechanical Property steel grade minimum yield strength Mpa Tensile strength Minimum elongation % Minimum impact energy J Specified thickness mm Specified thickness mm Specified thickness mm at test temperature of ＜16 ＞16≤40 ＜3 ≥3≤40 ≤40 -20℃ 0℃ 20℃ S235JRH 235 225 360-510 360-510 24 - - 27 S275J0H 275 265 430-580 410-560 20 - 27 - S275J2H 27 - - S355J0H 365 345 510-680 470-630 20 - 27 - ... -
Top Suppliers Flex Gas Line - Spirally welded steel pipes ASTM A252 grade 1 2 3 – Spiral
Mechanical Property Grade 1 Grade 2 Grade 3 Yield Point or yield strength, min, Mpa(PSI) 205(30 000) 240(35 000) 310(45 000) Tensile strength, min, Mpa(PSI) 345(50 000) 415(60 000) 455(66 0000) Product analysis The steel shall contain no more than 0.050% phosphorous. Permissible Variations In Weights and Dimensions Each length of pipe pile shall be weighed separately and its weight shall not vary more than 15% over or 5% under its theoretical weight, calculated using its length and... -
2021 Wholesale Price Water Pipe Welding - API 5L 46th Edition Specification for Line Pipe Scope – Spiral
Delivery Condition PSL Delivery Condition Pipe grade PSL1 As-rolled, normalized, normalizing formed A As-rolled, normalizing rolled, thermomechanical rolled, thermo-mechanical formed, normalizing formed, normalized, normalized and tempered or if agreed Q&T SMLS only B As-rolled, normalizing rolled, thermomechanical rolled, thermo-mechanical formed, normalizing formed, normalized, normalized and tempered X42, X46, X52, X56, X60, X65, X70 PSL 2 As-rolled BR, X42R Normaliz... -
Factory Wholesale Spiral Steel Pipe - Outside 3LPE coating DIN 30670 inside FBE coating – Spiral
Product Description Cangzhou Spiral Steel Pipes Group Co., Ltd have 4 production lines of anticorrosion & thermal insulation to perform the 3LPE coating and FBE coating. The maximum outside diameter can be 2600mm. The coatings are suitable for the protection of buried or submerged steel pipes at design temperatures of -40℃ to +80℃. The present standard specifies requirements for coatings that are applied to spirally welded steel pipes and fittings used for the construction of pipelines fo...