Good Quality SSAW Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

While in the past few years, our organization absorbed and digested innovative technologies both equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted for the advancement of 3lpe , China Pipe For Underground Water Line , DSAW Pipes Factories , And we can help looking for any products of the customers' needs. Make sure provide the best Service, the Best Quality, The fast Delivery.

Good Quality SSAW Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral Detail:

Mechanical Property

	Grade A	Grade B	Grade C	Grade D	Grade E
Yield strength, min, Mpa(KSI)	330(48)	415(60)	415(60)	415(60)	445(66)
Tensile strength, min, Mpa(KSI)	205(30)	240(35)	290(42)	315(46)	360(52)

Chemical Composition

Element	Composition, Max, %
Element	Grade A	Grade B	Grade C	Grade D	Grade E
Carbon	0.25	0.26	0.28	0.30	0.30
Manganese	1.00	1.00	1.20	1.30	1.40
Phosphorus	0.035	0.035	0.035	0.035	0.035
Sulfur	0.035	0.035	0.035	0.035	0.035

Hydrostatic Test

Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D

Permissible Variations In Weights and Dimensions

Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length.
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter.
Wall thickness at any point shall not more than 12.5% under the specified wall thickness.

Length

Single random lengths: 16 to 25ft(4.88 to 7.62m)
Double random lengths: over 25ft to 35ft(7.62 to 10.67m)
Uniform lengths: permissible variation ±1in

Ends

Pipe piles shall be furnished with plain ends, and the burrs at the ends shall be removed
When the pipe end specified to be bevel ends, the angle shall be 30 to 35 degree

Product detail pictures:

Related Product Guide:

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Good Quality SSAW Pipe - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral , The product will supply to all over the world, such as: Milan, Hungary, Jordan, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.

A252 GRADE 3 Steel Pipe