Good Quality Straight Seam Pipe - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral
Good Quality Straight Seam Pipe - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:
Chemical Composition of ASTM A234 WPB & WPC
Element |
Content, % |
|
ASTM A234 WPB |
ASTM A234 WPC |
|
Carbon [C] |
≤0.30 |
≤0.35 |
Manganese [Mn] |
0.29-1.06 |
0.29-1.06 |
Phosphorus [P] |
≤0.050 |
≤0.050 |
Sulfur [S] |
≤0.058 |
≤0.058 |
Silicon [Si] |
≥0.10 |
≥0.10 |
Chromium [Cr] |
≤0.40 |
≤0.40 |
Molybdenum [Mo] |
≤0.15 |
≤0.15 |
Nickel [Ni] |
≤0.40 |
≤0.40 |
Copper [Cu] |
≤0.40 |
≤0.40 |
Vanadium [V] |
≤0.08 |
≤0.08 |
*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.
Mechanical Properties of ASTM A234 WPB & WPC
ASTM A234 Grades |
Tensile Strength, min. |
Yield Strength, min. |
Elongation %, min |
|||
ksi |
MPa |
ksi |
MPa |
Longitudinal |
Transverse |
|
WPB |
60 |
415 |
35 |
240 |
22 |
14 |
WPC |
70 |
485 |
40 |
275 |
22 |
14 |
*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.
Manufacture
The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.
Product detail pictures:


Related Product Guide:
We not only will try our greatest to offer superb companies to just about every buyer, but also are ready to receive any suggestion offered by our shoppers for Good Quality Straight Seam Pipe - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Borussia Dortmund, Kuwait, Florida, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part products. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.

We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
