High Quality Hot And Cold Water Lines - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Fbe Company , SPIRALLY WELDED STEEL PIPES ASTM A252 Factories , Fbe Coating , We cordially welcome customers from at home and abroad to join us and cooperate with us to enjoy a better future.
High Quality Hot And Cold Water Lines - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral Detail:

Physical properties of epoxy powder materials

Specific gravity at 23℃: minimum 1.2 and maximum 1.8
Sieve analysis: maximum 2.0
Gel time at 200 ℃: less than 120s

Abrasive blast cleaning

Bare steel surfaces shall be abrasive blast-cleaned in accordance with SSPC-SP10/NACE No. 2 unless otherwise specified by the purchaser. The blast anchor pattern or profile depth shall be 1.5 mil to 4.0 mil(38 µm to 102 µm) measured in accordance with ASTM D4417.

Preheating

Pipe that has been cleaned shall be preheated at temperature less than 260℃, the heat source shall not contaminate the pipe surface.

Thickness

The coating powder shall be applied to the preheated pipe at a uniform cure-film thickness of not less than 12 mils(305μm) on the exterior or interior. The maximum thickness shall not exceed a nominal 16 mils(406μm) unless recommended by the manufacturer or specified by the pruchaser.

Optional epoxy performance testing

The purchaser may specify additional testing to establish epoxy performance. The following test procedures, all of which shall be performed on production pipe test rings, may be specified:
1. Cross-section porosity.
2. Interface porosity.
3. Thermal analysis (DSC).
4. Permanent strain (bendability).
5. Water soak.
6. Impact.
7. Cathodic disbondment test.


Product detail pictures:

High Quality Hot And Cold Water Lines - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures

High Quality Hot And Cold Water Lines - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures

High Quality Hot And Cold Water Lines - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures


Related Product Guide:

Our pros are lessen prices,dynamic sales team,specialised QC,sturdy factories,top quality services and products for High Quality Hot And Cold Water Lines - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral , The product will supply to all over the world, such as: Jordan, Brisbane, Belgium, The quality of our products is equal to OEM's quality, because our core parts are the same with OEM supplier. The above products have passed professional certification, and we not only can produce OEM-standard products but we also accept Customized Products order.
  • We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
    5 Stars By Poppy from Guyana - 2018.12.28 15:18
    Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
    5 Stars By Laura from venezuela - 2017.11.20 15:58
    Write your message here and send it to us