Manufacturer For Welding Stainless Pipe Without Purge - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral
Manufacturer For Welding Stainless Pipe Without Purge - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral Detail:
Chemical Composition of ASTM A234 WPB & WPC
Element |
Content, % |
|
ASTM A234 WPB |
ASTM A234 WPC |
|
Carbon [C] |
≤0.30 |
≤0.35 |
Manganese [Mn] |
0.29-1.06 |
0.29-1.06 |
Phosphorus [P] |
≤0.050 |
≤0.050 |
Sulfur [S] |
≤0.058 |
≤0.058 |
Silicon [Si] |
≥0.10 |
≥0.10 |
Chromium [Cr] |
≤0.40 |
≤0.40 |
Molybdenum [Mo] |
≤0.15 |
≤0.15 |
Nickel [Ni] |
≤0.40 |
≤0.40 |
Copper [Cu] |
≤0.40 |
≤0.40 |
Vanadium [V] |
≤0.08 |
≤0.08 |
*The Carbon Equivalent [C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15] shall be no greater than 0.50 and shall be reported on MTC.
Mechanical Properties of ASTM A234 WPB & WPC
ASTM A234 Grades |
Tensile Strength, min. |
Yield Strength, min. |
Elongation %, min |
|||
ksi |
MPa |
ksi |
MPa |
Longitudinal |
Transverse |
|
WPB |
60 |
415 |
35 |
240 |
22 |
14 |
WPC |
70 |
485 |
40 |
275 |
22 |
14 |
*1. WPB and WPC pipe fittings manufactured from plates shall have a minimum elongation of 17%.
*2. Unless required, hardness value doesn’t need to be reported.
Manufacture
The ASTM A234 carbon steel pipe fittings may be made from seamless pipes, welded pipes or plates by shaping operations of pressing, piercing, extruding, bending, fusion welding, machining, or by a combination of two or more these operations. All welds including welds in tubular products from which fittings are made shall be made in accordance with ASME Section IX. Post-weld heat treatment at 1100 to 1250°F[595 to 675°C] and radiographic examination shall be performed after the welding process.
Product detail pictures:


Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Manufacturer For Welding Stainless Pipe Without Purge - ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers – Spiral , The product will supply to all over the world, such as: Wellington, Austria, Paraguay, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.

This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
