Manufacturing Companies For Gas Lines - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral
Manufacturing Companies For Gas Lines - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:
The Mechanical Properties of the SSAW pipe
steel grade |
minimum yield strength |
minimum Tensile strength |
Minimum Elongation |
B |
245 |
415 |
23 |
X42 |
290 |
415 |
23 |
X46 |
320 |
435 |
22 |
X52 |
360 |
460 |
21 |
X56 |
390 |
490 |
19 |
X60 |
415 |
520 |
18 |
X65 |
450 |
535 |
18 |
X70 |
485 |
570 |
17 |
The Chemical composition of the SSAW pipes
steel grade |
C |
Mn |
P |
S |
V+Nb+Ti |
Max % |
Max % |
Max % |
Max % |
Max % |
|
B |
0.26 |
1.2 |
0.03 |
0.03 |
0.15 |
X42 |
0.26 |
1.3 |
0.03 |
0.03 |
0.15 |
X46 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
X52 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
X56 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
X60 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
X65 |
0.26 |
1.45 |
0.03 |
0.03 |
0.15 |
X70 |
0.26 |
1.65 |
0.03 |
0.03 |
0.15 |
The Geometric tolerance of the SSAW pipes
Geometric tolerances |
||||||||||
outside diameter |
Wall thickness |
straightness |
out-of-roundness |
mass |
Maximum weld bead height |
|||||
D |
T |
|||||||||
≤1422mm |
>1422mm |
<15mm |
≥15mm |
pipe end 1.5m |
full length |
pipe body |
pipe end |
T≤13mm |
T>13mm |
|
±0.5% |
as agreed |
±10% |
±1.5mm |
3.2mm |
0.2% L |
0.020D |
0.015D |
‘+10% |
3.5mm |
4.8mm |
Hydrostatic Test
The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.
Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.
Product detail pictures:

Related Product Guide:
Quality initially, Honesty as base, Sincere company and mutual profit is our idea, in order to create repeatedly and pursue the excellence for Manufacturing Companies For Gas Lines - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: Irish, Islamabad, Palestine, Each product is carefully made, it will make you satisfied. Our products in the production process have got strictly monitored, because it is only to provide you the best quality, we will feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.

We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
