Manufacturing Companies For Gas Lines - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral
Manufacturing Companies For Gas Lines - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral Detail:
Mechanical Property
Grade A | Grade B | Grade C | Grade D | Grade E | |
Yield strength, min, Mpa(KSI) | 330(48) | 415(60) | 415(60) | 415(60) | 445(66) |
Tensile strength, min, Mpa(KSI) | 205(30) | 240(35) | 290(42) | 315(46) | 360(52) |
Chemical Composition
Element |
Composition, Max, % |
||||
Grade A |
Grade B |
Grade C |
Grade D |
Grade E |
|
Carbon |
0.25 |
0.26 |
0.28 |
0.30 |
0.30 |
Manganese |
1.00 |
1.00 |
1.20 |
1.30 |
1.40 |
Phosphorus |
0.035 |
0.035 |
0.035 |
0.035 |
0.035 |
Sulfur |
0.035 |
0.035 |
0.035 |
0.035 |
0.035 |
Hydrostatic Test
Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D
Permissible Variations In Weights and Dimensions
Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length.
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter.
Wall thickness at any point shall not more than 12.5% under the specified wall thickness.
Length
Single random lengths: 16 to 25ft(4.88 to 7.62m)
Double random lengths: over 25ft to 35ft(7.62 to 10.67m)
Uniform lengths: permissible variation ±1in
Ends
Pipe piles shall be furnished with plain ends, and the burrs at the ends shall be removed
When the pipe end specified to be bevel ends, the angle shall be 30 to 35 degree
Product detail pictures:


Related Product Guide:
We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Manufacturing Companies For Gas Lines - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral , The product will supply to all over the world, such as: Lithuania, Australia, kazakhstan, We pursue the management tenet of Quality is superior, Service is supreme, Reputation is first, and will sincerely create and share success with all clients. We welcome you to contact us for more information and look forward to working with you.

The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
