OEM/ODM Manufacturer Drain Line - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral

Short Description:

Product Detail

Product Tags

Feedback (2)

We have been also concentrating on enhancing the things management and QC method so that we could preserve terrific edge inside the fiercely-competitive enterprise for X65 SSAW Line Pipe , Weld On Pipe Flange , Tube Pile , We maintain timely delivery schedules, innovative designs, quality and transparency for our customers. Our moto is to deliver quality products within stipulated time.

OEM/ODM Manufacturer Drain Line - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral Detail:

Mechanical Property

	Grade A	Grade B	Grade C	Grade D	Grade E
Yield strength, min, Mpa(KSI)	330(48)	415(60)	415(60)	415(60)	445(66)
Tensile strength, min, Mpa(KSI)	205(30)	240(35)	290(42)	315(46)	360(52)

Chemical Composition

Element	Composition, Max, %
Element	Grade A	Grade B	Grade C	Grade D	Grade E
Carbon	0.25	0.26	0.28	0.30	0.30
Manganese	1.00	1.00	1.20	1.30	1.40
Phosphorus	0.035	0.035	0.035	0.035	0.035
Sulfur	0.035	0.035	0.035	0.035	0.035

Hydrostatic Test

Each length of pipe shall be tested by the manufacturer to a hydrostatic pressure that will produce in the pipe wall a stress of not less than 60% of the specified minimum yield strength at room temperature. The pressure shall be determined by the following equation:
P=2St/D

Permissible Variations In Weights and Dimensions

Each length of pipe shall be weighed separately and its weight shall not vary more than 10% over or 5.5% under its theoretical weight, calculated using its length and its weight per unit length.
The outside diameter shall not vary more than ±1% from the specified nominal outside diameter.
Wall thickness at any point shall not more than 12.5% under the specified wall thickness.

Length

Single random lengths: 16 to 25ft(4.88 to 7.62m)
Double random lengths: over 25ft to 35ft(7.62 to 10.67m)
Uniform lengths: permissible variation ±1in

Ends

Pipe piles shall be furnished with plain ends, and the burrs at the ends shall be removed
When the pipe end specified to be bevel ends, the angle shall be 30 to 35 degree

Product detail pictures:

Related Product Guide:

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of OEM/ODM Manufacturer Drain Line - Helical-seam carbon steel pipes ASTM A139 Grade A, B, C – Spiral , The product will supply to all over the world, such as: Mauritius, Turkey, Uganda, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.

Flexible Gas Pipe