PriceList For Cylindrical Shapes Steel Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral
PriceList For Cylindrical Shapes Steel Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral Detail:
The Mechanical Properties of the SSAW pipe
steel grade |
minimum yield strength |
minimum Tensile strength |
Minimum Elongation |
B |
245 |
415 |
23 |
X42 |
290 |
415 |
23 |
X46 |
320 |
435 |
22 |
X52 |
360 |
460 |
21 |
X56 |
390 |
490 |
19 |
X60 |
415 |
520 |
18 |
X65 |
450 |
535 |
18 |
X70 |
485 |
570 |
17 |
The Chemical composition of the SSAW pipes
steel grade |
C |
Mn |
P |
S |
V+Nb+Ti |
Max % |
Max % |
Max % |
Max % |
Max % |
|
B |
0.26 |
1.2 |
0.03 |
0.03 |
0.15 |
X42 |
0.26 |
1.3 |
0.03 |
0.03 |
0.15 |
X46 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
X52 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
X56 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
X60 |
0.26 |
1.4 |
0.03 |
0.03 |
0.15 |
X65 |
0.26 |
1.45 |
0.03 |
0.03 |
0.15 |
X70 |
0.26 |
1.65 |
0.03 |
0.03 |
0.15 |
The Geometric tolerance of the SSAW pipes
Geometric tolerances |
||||||||||
outside diameter |
Wall thickness |
straightness |
out-of-roundness |
mass |
Maximum weld bead height |
|||||
D |
T |
|||||||||
≤1422mm |
>1422mm |
<15mm |
≥15mm |
pipe end 1.5m |
full length |
pipe body |
pipe end |
T≤13mm |
T>13mm |
|
±0.5% |
as agreed |
±10% |
±1.5mm |
3.2mm |
0.2% L |
0.020D |
0.015D |
‘+10% |
3.5mm |
4.8mm |
Hydrostatic Test
The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
Jointers need not be hydrostatically tested, providedthat the portions of pipe used in marking the jointers were successfully hydrostatically tested prior to the joining operation.
Traceablity:
For PSL 1 pipe, the manufacturer shall establish and follow documented procedures for maintaining:
The heat identity until each related chmical tests is performed and conformance with the specified requirements is shown
The test-unit identity until each related mechanical tests is performed and conformance with the specified requirements is shown
For PSL 2 pipe, the manufacturer shall establish and follow documented procedures for maintaining the heat identity and the test-unit identity for such pipe. Such procedures shall provide means for tracing any length of pipe to the proper test unit and the related chemical test results.
Product detail pictures:
Related Product Guide:
That has a positive and progressive attitude to customer's interest, our organization consistently improves our products quality to satisfy the demands of shoppers and further focuses on safety, reliability, environmental specifications, and innovation of PriceList For Cylindrical Shapes Steel Pipe - Api 5l Line Pipes Grade B To X70 Od From 219mm To 3500mm – Spiral , The product will supply to all over the world, such as: Venezuela, Portugal, Paraguay, We welcome you to visit our company, factory and our showroom displayed various products that will meet your expectation, meanwhile, it is convenient to visit our website, our sales staff will try their efforts to provide you the best service. If you need more information, please do not hesitate to contact us by E-mail or telephone.
By Maggie from Moscow - 2018.07.26 16:51
Hope that the company could stick to the enterprise spirit of Quality, Efficiency, Innovation and Integrity, it will be better and better in the future.
By Samantha from Portugal - 2018.05.13 17:00