Products
-
Helical Welded X65 SSAW Line Pipe
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural, hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Cangzhou Spiral Steel Pipes Group Co., Ltd supplies hollow section of circular forms steel pipes for structure.
-
ASTM A234 WPB & WPC pipe fittings including elbows, tee, reducers
This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. The material for fittings shall consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added. Forging or shaping operations may be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or by a combination of two or more of these operations. The forming procedure shall be so applied that it will not produce injurious imperfections in the fittings. Fittings, after forming at an elevated temperature, shall be cooled to a temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. The fittings shall be subjected to tension test, hardness test, and hydrostatic test.
-
Seamless Carbon Steel Pipes ASTM A106 Gr.B
This specification covers seamless carbon steel pipe for high-temperature service in NPS 1 to NPS 48, with nominal wall thickness as given in ASME B 36.10M. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding.
We Cangzhou Spiral Steel Pipes group co.ltd has stock pipes from OD 1 inch to 16 inch for around 5000 Mt, sourced from TPCO, Fengbao Steel, Baoutou steel etc. Meanwhile we can supply hot expansion seamless pipes for large outside diameter up to 1200mm.
-
Seamless Alloy Steel Pipe ASME SA335 GRADE P11, P12, P22, P91, P92
We have large quantity alloy tubes in stock, range from 2inch to 24inch, grade such as P9, P11 etc to used for the heating surface of high temperature boiler, economizer, header, superheater, reheater and for petrochemical industry etc. Implement the relevant specifications such as GB3087, GB/T 5310, DIN17175, EN10216, ASME SA-106M, ASME SA192M, ASME SA209M, ASME SA -210M, ASME SA -213M, ASME SA -335M, JIS G 3456, JIS G 3461, JIS G 3462 and so on.
-
Hollow-Section Structural Pipes Seamless Welded Pipe
We have large quantity alloy tubes in stock, range from 2inch to 24inch, grade such as P9, P11 etc to used for the heating surface of high temperature boiler, economizer, header, superheater, reheater and for petrochemical industry etc. Implement the relevant specifications such as GB3087, GB/T 5310, DIN17175, EN10216, ASME SA-106M, ASME SA192M, ASME SA209M, ASME SA -210M, ASME SA -213M, ASME SA -335M, JIS G 3456, JIS G 3461, JIS G 3462 and so on.
-
Spiral Submerged Arc Welded Pipe EN10219 SSAW Steel Pipe
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural, hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Cangzhou Spiral Steel Pipes Group Co., Ltd supplies hollow section of circular forms steel pipes for structure.
-
Helical-seam carbon steel pipes ASTM A139 Grade A, B, C
This specification covers five grades of electric-fusion(arc)-welded helical-seam steel pipe. The pipe is intended for conveying liquid, gas or vapor.
With 13 production lines of spiral steel pipe, Cangzhou Spiral Steel pipes group Co., Ltd. is capable of manufacturing helical-seam steel pipes with outside diameter from 219mm to 3500mm and wall thickness up to 25.4mm.
-
S355 J0 Spiral Seam Welded Pipe For Sale
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural, hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Cangzhou Spiral Steel Pipes Group Co., Ltd supplies hollow section of circular forms steel pipes for structure.
-
X52 SSAW Line Seamless Welded Pipe
We Cangzhou Spiral Steel Pipes group co.ltd has stock pipes from OD 1 inch to 16 inch for around 5000 Mt, sourced from TPCO, Fengbao Steel, Baoutou steel etc. Meanwhile we can supply hot expansion seamless pipes for large outside diameter up to 1200mm.
-
API 5L 46th Edition Specification for Line Pipe Scope
Specified the manufacture of two product levels (PSL1 and PSL2) of seamless and welded steel pipe for the use of a pipeline in the transportation of petroleum and natural gas. For material use in a Sour service application refer to Annex H and for offshore service application refer to Annex J of API5L 45th.
-
Cold Formed Pipes, EN10219 S235JRH, S235J0H, S355JRH, S355J0H
This part of this European Standard specifies the technical delivery conditions for cold formed welded structural, hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.
Cangzhou Spiral Steel Pipes Group Co., Ltd supplies hollow section of circular forms steel pipes for structure.
-
Outside 3LPE Coating DIN 30670 Inside FBE Coating
This standard specifies requirements for factory-applied three-layer extruded polyethylene-based coatings and one or multi-layered sintered polyethylene-based coatings for the corrosion protection of steel pipes and fittings.