Professional China Epoxy Sewer Pipe Lining - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To create extra value for customers is our enterprise philosophy; buyer growing is our working chase for China S355 J0 Spiral Steel Pipe , Gas Pipes , Welded Line Pipe , We welcome new and previous clients from all walks of lifetime to get in touch with us for future small business interactions and mutual success!
Professional China Epoxy Sewer Pipe Lining - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral Detail:

Physical properties of epoxy powder materials

Specific gravity at 23℃: minimum 1.2 and maximum 1.8
Sieve analysis: maximum 2.0
Gel time at 200 ℃: less than 120s

Abrasive blast cleaning

Bare steel surfaces shall be abrasive blast-cleaned in accordance with SSPC-SP10/NACE No. 2 unless otherwise specified by the purchaser. The blast anchor pattern or profile depth shall be 1.5 mil to 4.0 mil(38 µm to 102 µm) measured in accordance with ASTM D4417.

Preheating

Pipe that has been cleaned shall be preheated at temperature less than 260℃, the heat source shall not contaminate the pipe surface.

Thickness

The coating powder shall be applied to the preheated pipe at a uniform cure-film thickness of not less than 12 mils(305μm) on the exterior or interior. The maximum thickness shall not exceed a nominal 16 mils(406μm) unless recommended by the manufacturer or specified by the pruchaser.

Optional epoxy performance testing

The purchaser may specify additional testing to establish epoxy performance. The following test procedures, all of which shall be performed on production pipe test rings, may be specified:
1. Cross-section porosity.
2. Interface porosity.
3. Thermal analysis (DSC).
4. Permanent strain (bendability).
5. Water soak.
6. Impact.
7. Cathodic disbondment test.


Product detail pictures:

Professional China Epoxy Sewer Pipe Lining - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures

Professional China Epoxy Sewer Pipe Lining - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures

Professional China Epoxy Sewer Pipe Lining - Fusion-Bonded Epoxy Coatings Awwa C213 Standard  – Spiral detail pictures


Related Product Guide:

We're commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for Professional China Epoxy Sewer Pipe Lining - Fusion-Bonded Epoxy Coatings Awwa C213 Standard – Spiral , The product will supply to all over the world, such as: Jakarta, Hyderabad, Eindhoven, Our company regards reasonable prices, high quality,efficient production time and good after-sales service as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.
  • The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Dawn from Los Angeles - 2017.09.09 10:18
    The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
    5 Stars By Frank from Tunisia - 2017.11.12 12:31
    Write your message here and send it to us